Simulation of the Propagation of Circumferential Crack in the Cylindrical Element Structure Exposed to Cyclic Loadings
DOI:
https://doi.org/10.20998/2078-774X.2018.12.11Анотація
The purpose of these studies was to work out the methodsfor the computation of crack development in the plate and axisymmetric elements of structures at cyclic loading for the plasto-elastic arrangement using the conception of the accumulation of scattered damages in the material. In the domain in question, we simulated the processes of alternating-sign plasto-elastic deformation and the material crack resistance was estimated using the fatigue test data for smooth specimens. Thermal and elastically-deformed states of the structure were determined for different loading modes using the finite elements method. The material damageability was assessed for the curves of low-cycle fatigue and for the range of plasto-elastic deformations on the route of probable crack propagation using the hypothesis of linear summation. As soon as a critical value of the damageability is achieved the crack is propagated stepwise for the specified step. As an example, consideration was given to the kinetics of circumferential crack in the cylindrical element exposed to the axial-symmetric cyclic loading. The contact of crack edges was taken into consideration for compressing loading semicycles. The obtained data agree with the data obtained using the Newman method. The suggested technique can be used for the estimation of survivability of the elements of steam turbines (heat rotor grooves at start-up-stop modes, blade and disk interlocks, etc.).Посилання
SOU-N MEV 40.1 –21677681–52: 2011. (2011), Viznachennya rozrahunkovogo resursu taotsinkazhivuchostirotorivikorpusnyhdetaley turbyn. Metodichny vkazyvki [Defining resource calculationandassessmentofsurvivability rotorsandbody parts turbines. Guidelines], OEP "GRIFRE", Kiev.
Shul’zhenko, M. G., Gontarovskyi, P. P., Garmash, N. G., Melezhyk, I. I. and Protasova, T. V. (2010), "Thermostressedstateand crack growth resistance or rotors of the NPP turbine K-1000-60/1500", Strength of materials, Vol.42,No 1. pp. 114–119,ISSN 0039-2316.
Kogaev, V. P., Mahutov, N. A. and Gusenkov, A. P. (1985), Raschety detaley mashin i konstruktsiy na prochnost`idolgovechnost` [The calculations of machine parts and structures for strength and durability],Mashynostroenie,Moscow,Russia.
Cherepanov, G. P. (1974), Mehanika hrupkogo razrusheniya [Brittle fracture mechanics], Nauka, Moscow.
Pestrikov, V. M. and Morozov, E. M. (2002), Mehanika razrusheniya tverdyih tel [Fracture mechanics of solidbodies],Professija, SPb.
(1990), "ASME Boiler and Pressure Vessel Code", Section XI, Appendix A, The American Society of Mechanical Engineers,31December, New York. New York, Addenda, p. 28.
Bloom, J. M. (1994), "An approach to account for negative R-ratio effects in fatigue crack growth calculations forpressurevessels based on crack closure concepts", Trans. ASME, Vol. 116, pp. 30–35.
Shulzhenko, N. G., Gontarovskiy, P. P., Garmash, N. G. and Melezhyk, I. I. (2017), "Rozrakhunkova otsinkarozvytkutrishchyny z kontaktuyuchymy berehamy v ploskykh elementakh konstruktsiy [Computationestimationofthecrackdevelopmentwith crack edges contact of plane structuralelements]",VisnykZaporiz’kohonatsional’nohouniversytetu.Fiziko-matematicni nauki, no.1, pp. 365–373, ISSN 2413-6549.
Shulzhenko, M, Gontarovskiy, P, Garmash, N. and Melezhyk, I. (2017), "Evaluation of the Crack Development at aCyclicLoading of Plate Elements Using the Parameters of Scattered Damages of the Material", Bulletin ofNTU"KhPI".Series:Powerandheat engineering processes and equipment, No. 9(1231), pp. 41–44, ISSN 2078-774X,doi:10.20998/2078-774X.2017.09.06.
Podgorny, A. N., Gontarovsky, P. P., Kirkach, B. N., Matjuhin, Yu. I. and Havin, G. L. (1989), Zadachikontaktnogovzaimodeystviya elementov konstruktsiy [Problems of contact interaction of structural elements], ANUSSR,In-tproblemmashinostroyeniya, Nauk. dumka, Kiev.
Moskvitin, V. V. (1965), Plastichnost` pri peremennyih nagruzheniyah [Plasticity at variable loadings],Izdatelstvomoskovskogo universiteta, Moscow, Russia.
Gontarovskiy, P. P. and Garmash, N. G. (2001), "K resheniyu kontaktnykh zadach MKE s uchetom friktsionnogo nagreva[Tothe solution of contact problems of FEM with allowance for frictional heating]", Bulletin ofNTU"KhPI".Series:Dynamicsandstrength of machines, no. 25, pp. 67–74, ISSN 2078-9130.
(1986), Detali parovyih statsionarnyih turbin. Raschet na malotsiklovuyu ustalost: RTM 108.021.103-85 [Details ofstationarysteam-turbines. Calculation on a low-cycle fatigue], Ministerstvo energeticheskogo mashinostroeniya, Moscow, 49 p.
Shulzhenko, N. G., Gontarovskiy, P. P. and Melezhyk, I. I. (2005), "Raschet treshchinostoykosti elementovkonstruktsiymetodom konechnykh elementov [Calculation of the crack resistance of structural elements bythefiniteelementmethod]",Bulletinof NTU "KhPI". Series: Dynamics and strength of machines,, no. 21, pp. 127–132, ISSN 2078-9130.
