EVALUATION OF THE EFFICIENCY OF THE SOCKET LATCHES BY TURN-LINK DIAPHRAGMS USING THE CFD-PACKET
DOI:
https://doi.org/10.20998/2078-774X.2018.12.04Анотація
ABSTRACT As a result of conducting and processing the results of numerical studies, an analytical dependence was obtained to estimate the squares of the velocity coefficients of the nozzle arrays with Rotating diaphragms. The obtained dependence makes it possible to estimate the effect of the geometric and regime parameters of the gratings on their efficiency. To obtain such a dependence using the rich Rechtshafner plan and an additional plan that increases the accuracy and adequacy of the dependence, a computational experiment was planned. In accordance with the developed experiment plans, a number of nozzle arrays with different geometries and the relative displacement of their fixed and Rotating parts were designed and their calculated areas were constructed. With the help of complex CFD, the corresponding computational studies were carried out to evaluate the effect of geometric and regime parameters of nozzle arrays with Rotating diaphragms on their effectiveness. The squares of the velocity coefficients of the nozzle arrays with Rotating diaphragms obtained in the course of numerical studies were used in the process of appropriate processing and the creation of an analytic dependence to evaluate the effectiveness of such gratings. The results of numerical studies, the form of the analytical dependence and the graphs of the influence of geometric and regime parameters on the squares of the speed coefficients of the nozzle arrays with Rotating diaphragms are presented. The obtained dependence is intended for solving problems of synthesis and analysis of heating turbines with adjustable steam samplings.Посилання
Boiko, A. V. and Usaty, A. P. (2016), "Integrated Mathematical Model of the Processes intheTurbinewithAdjustableSteamExtraction", Bulletin of NTU "KhPI". Series: Power and heat engineering processesandequipment,no.8(1180),pp. 28–36, ISSN 2078-774X, doi: 10.20998/2078-774X.2016.08.04.
Chung T. J. (2002), Computational fluid dynamics, CAMBRIDGE UNIVERSITY PRESS, Cambridge, 1022 p. ISBN 0-521-59416-2.
Siclari, M. J. and Jameson, A. (1989), "A multigrid finite volume method for solving the Euler and Navier-Stokes equationsforhigh speed flows", AIAA paper, AIAA-89-0283.
Chung, T. J. (1978), "Finite Element Analysis in Fluid. New York: McGraw-Hill. Transitions and interactions ofinviscid/viscous,compressible/incompressible and laminar/turbulent flow", Int. J. Num. Meth. Fl., No. 31, pp. 23-46.
Knupp P., Steinberg S. (1992), Fundamentals of grid generation. CRC Press.
Boyko A. V., Govoruschenko Yu. N., Burlaka M.V. (2012), Primenenie vyichislitelnoy aerodinamiki k optimizatsiilopatokturbomashin [Application of computational aerodynamics to optimization of turbomachineblades],NTU"KhPI",Kharkov,Ukraine,192 p., ISBN 978-617-05-0010-6.
Gukasova E. A., Zhukovskiy M. I., Zyisina, L. M. (1961), Aerodinamicheskoe sovershenstvovanie lopatochnyihapparatovparovyih I gazovyih turbin [Aerodynamic perfectionof the scapular blades of steamandgasturbines],Gosenergoizdat,Moscow,Russian, 167 p.
Meltyuhov V. A. (1986), Otsenka kachestva novyih turbinnyih reshetok profiley dlya rezhimov diffuzornogoikonfuzornogotecheniy: dis. ... kand. tekhn. nauk [Evaluation of the quality of new turbine profile gridsforthediffusiveIushfuzornycurrentmodes. Candidate eng. sci. diss. (Ph. D.)], Kharkiv, 205 p.
Boiko A. V., Usaty A. P., Barannik V. S. (2013), "Povyishenie tochnosti formalnoy makromodeli pri planirovanii eksperimenta[The increasing of formal macromodel accuracy when planuing the experiment]", Bulletin of NTU"KhPI".Series:Powerandheatengineering processes and equipment, no. 12(986), pp. 5–9, ISSN 2078-774X.
Rechtschaffner R. L. (1967), "Saturated fractions of 2n and 3n factorial designs", Technometrics, No. 4, pp. 569–575.
Usaty, А. P. (2012), Vserezhimnaya mnogoparametricheskaya mnogokriterialnaya optimizatsiya protochnoy chasti turbinvintegrirovannom informatsionnom prostranstve: dis. ... d-ra tekhn. nauk [Multi-mode multi-parameters multi-criterionoptimizationof the turbine flow path in the integrated information space. Dr. eng. sci. diss.], NTU "KhPI",Kharkov,Uktaine.
Boiko, A. V., Usaty, A. P. and Rudenko, A. S. (2014), Mnogokriterial'naja mnogoparametricheskaja optimi -zacijaprotochnojchasti osevyh turbin s uchetom rezhimov jekspluatacii [Multi-criterion multi-parametric optimization offlowpathsofaxialturbinestaking into consideration their mode of operation], NTU "KhPI", Kharkov, Ukraine.
