Specific Features of the Damageability of the Welded Joints of Steam Pipelines that Have Been in Service for a Long Time

Автор(и)

  • Igor Kasyanenko Національний технічний університет "ХПІ", Україна

DOI:

https://doi.org/10.20998/2078-774X.2019.03.13

Анотація

The aim of the work is to identify the features of damageability of welded joints of heat-resistant steels (12Х1МФ, 15Х1М1Ф) for long-term creep exploitation. To achieve the goal in the study of the structure and damage, metallographic methods and methods for determining mechanical properties were used. Studying the peculiarities of using heat-resistant steels for steam pipelines and elements of their systems as applied to the production of power-generating blocks under creep conditions over 270.000 hours allowed: to establish the reasons for their damageability and destructibility; mechanisms for the development of creep cracks and fatigue cracks; connection structure with damage; structural changes. Established the relationship of damage with the presence of stress concentrators. The generalization of features of damage allowed to specify typical patterns of damage, which is advisable to reduce it. It was revealed that when welded joints are produced for more than 270.000 hours under the conditions of frequent start-stops of power units, their damage by the fatigue mechanism increases markedly. Revealed that damage by the mechanism of fatigue significantly depends on the structural state of the steam lines and their welded joints.

Посилання

Hromchenko F. A. (2002), Resurs svarnyh soedinenij paroprovodov [Resource of welded joints of steam lines], Mashinostroenie, Moscow, 348 p.

(2002), RD 34.17.421-92. Tipovaja instrukcija po kontrolju i prodleniju sroka sluzhby metalla osnovnyh jelementov kotlov, turbin i truboprovodov teplovyh jelektrostancij [Standard instruction for monitoring and extending the life of the metal of the main elements of boilers, turbines and pipelines of thermal power plants], Sluzhba peredovogo opyta ORGRJeS, Moscow, 94 p.

(2004), RD 10-577-03. Tipovaja instrukcija po kontrolju metalla i prodleniju sroka sluzhby osnovnyh jelementov kotlov, turbin i truboprovodov teplovyh jelektrostancij [Typical instructions for controlling the metal and extending the life of the main elements of boilers, turbines and pipelines of thermal power plants], NPO "Prombezopasnost'", Moscow, Russia.

(2004), SO 153-34.17.470-2003. Instrukcija o porjadke obsledovanija i prodlenija sroka sluzhby paroprovodov sverh parkovogo resursa [Instructions on the procedure for inspection and extension of the life of steam pipelines beyond the park resource], Gosgortehnadzor Rossii Minjenergo Rossii, RAO "EJeS Rossii", OAO "VTI", Moscow, Russia.

Dmitrik V. V. (2013), Svarnye soedinenija paroprovodov [Welded steam line connections]. Majdan, Kharkov, 163 p.

Elpanova N. V. (1989), "Vlijanie struktury na kinetiku razrushenija stali 12H1MF pri polzuchesti [The influence of the structure on the kinetics of destruction of steel 12H1MF during creep]", Metallovedenie i termicheskaja obrabotka metallov [Metal science and heat treatment of metals], no. 7, pp. 36–39.

Glushko A. (2016), "Researching of welded steam pipe joints operated for a long time", Eastern-European Journal of Enterprise Technologies, Vol. 6, Issue 1(84), pp. 14–20.

Dmitrik V. V., Glushko A. V., Grigorenko S. G. (2016), "Osobennosti poroobrazovanija v svarnyh soedinenijah paroprovodov v uslovijah dlitel'noj jekspluatacii [Features of pore formation in welded joints of steam pipelines in conditions of long-term operation]", Avtomaticheskaja svarka [Automatic welding], no. 9, pp. 56–60.

##submission.downloads##

Опубліковано

2019-12-28

Як цитувати

Kasyanenko, I. (2019). Specific Features of the Damageability of the Welded Joints of Steam Pipelines that Have Been in Service for a Long Time. Вісник Національного технічного університету «ХПІ». Серія: Енергетичнi та теплотехнiчнi процеси й устаткування, (3), 87–90. https://doi.org/10.20998/2078-774X.2019.03.13

Номер

Розділ

Енергетичні та теплотехнічні процеси й устаткування