THEORETICAL INVESTIGATIONS OF A DUAL-FUEL LOW-EMISSION GAS TURBINE COMBUSTOR
DOI:
https://doi.org/10.20998/2078-774X.2019.01.04Анотація
The use of dual-fuel gas turbine engines is one of the promising direction for improving the efficiency and reliability of power systems. The analysis of the possibility of creating a low-emission dual-fuel combustor for a gas turbine engine has been made. An effective method of organizing the working process in a dual-fuel gas turbine combustor is proposed. A low-emission gas turbine combustor with pre-mixing of fuel and air was selected as a research object. To increase the efficiency of processes in a dual-fuel gas turbine combustor, it is proposed to use the idea of preliminary mixing of liquid fuel with air in axial-radial swirlers. The choice of a mathematical model of liquid fuel burning in a dual-fuel low-emission combustor taking into consideration formation of the main toxic components has been made. Eddy dissipation concept and discrete phase models have been used for liquid fuel combustion process modeling. Theoretical investigations of nitrogen oxides formation have been carried out for various methods of liquid fuel injection into the channels of axial-radial swirlers of low-emission combustor. The results of three-dimensional mathematical modeling showed the prospect of a radial method of liquid fuel injection into the channels of axial-radial swirlers of a gas turbine low-emission combustor in comparison with the traditional method of liquid fuel supply using centrifugal nozzles. The results of mathematical modeling revealed that radial liquid fuel flow improves the thermal and emission combustor’s performance. As result radial fuel supply method was taken as the most efficient and perspective. The calculated values of nitrogen oxides emission at the exit section of the flame tube for radial supply of liquid fuel are 36-46 ppm.Посилання
Movchan S., Romanov V., Chobenko V., Shevtsov A. (2009), “Contact steam-and-gas turbine units of the “AQUARIUS” type. The present status & future prospects”, Proc. ASME Turbo-Expo 2009, GT 2009-60339.
Romanovsʹkyy, H. F., Serbin S. I., Patlaychuk V. M. (2005), Suchasni hazoturbinni ahrehaty. vol. 1. Ahrehaty vyrobnytstva Ukrayiny ta Rosiyi [Modern gas turbine units of Russia and Ukraine vol.1.], NUK, Nikolaev, 344 p.
Khalatov A. A., Yushchenko K. A., (2012), “Sovremennoye sostoyaniye i perspektivy ispol'zovaniya gazoturbinnykh tekhnologiy v teplovoy i yadernoy energetike, me-tallurgii i ZHKKH Ukrainy.Chast 1” [Modern conditions & perspectives of using and manufacturing gas turbine technologies in mechanical engineering,nuclear energy, metallurgy, housing and communal services in Ukraine. Charpet 1], Promyshlennaya teplotekhnika [Industrial heat engineering.], 2012, vol. 34, no 6, pp. 33, ISSN 0204-3602.
Halatov A. A., Yushhenko K. A., Isakov B. V., Dashevsʹkyy U. YA., Shevtsov A. P. (2013), “Gazoturbobuduvannya v Ukrayini: suchasny`j stan i perspekty`vy` rozvy`tku [gas turbine building in Ukraine: modern conditions & perspectives]”, [Gazette of National Academy of Sciences of Ukraine], no 12, pp. 40–49, doi.org/10.15407/visn2013.12.040, URL: http://www.nas.gov.ua/siaz/Ways_of_development_of_Ukrainian_science/article/14026.3.009.pdf.
Lindman О., Andersson M., Persson M., Munktell E. (2014), “Development of a liquid fuel combustion system for SGT-750”, Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition GT2014 June 16-20, 2014, Düsseldorf, Germany. doi:10.1115/GT2014-25380.
Serbii S. I, Vantsovskiy V., Vilkul V. V. (2004), “Eksperimental'noye issledovaniye besforsunochnogo dvukhregistrovogo frontovogo ustroystva kamery sgoraniya sudebnogo GTD [Experimental study of a two-register frameless device of frontal combustion chamber of a marine gas turbine unite]”. Sb. nauk. trudov NUK,[ Сollection of scientific works of Admiral Makarov National University of Shipbuilding] no 4(397), pp. 25–33.
Serbin S. I., Mostipanenko G. B. (2006), “Chyslove modelyuvannya protsesiv horinnya v eksperymentalʹnomu vidsiku hibrydnoyi kamery z·horyannya HTD potuzhnistyu 25 MVt [Mathematical Modeling of Burning Processes in the 25 MWt Gas Turbine Hybrid Combustor Experimental Module]”, Bulletin of NTU "KhPI". Series: Power and heat engineering processes and equipment, no. 5, pp. 59–66, ISSN 2078-774X.
Romanovskiy G. F., Serbin S. I. (1998), Plazmokhimicheskiye sistemy sudovoy energetiki [Plasma-chemical systems of marine energy], UGMTU, Nikolaev, 246 p.
Magnussen B. F. (1981), On the Structure of Turbulence and a Generalized Eddy Dissipation Concept for Chemical Reaction in Turbulent Flow, Proc. Nineteenth AIAA Meeting, St. Louis.
Pope S. B. (1997), Computationally efficient implementation of combustion chemistry using in-situ adaptive tabulation, Combustion Theory and Modeling, no 1. pp. 41–63.
Serbin S. I., Vilkul S. V. (2009), “Issledovaniye vliyaniya parametrov raspylivaniya zhidkogo topliva na temperaturnoye pole i ekologicheskiye kharakteristiki kamery sgoraniya [Investigation of the influence of liquid fuel spraying parametrs on thermal and emission levels in combustion chamber]”, Vestnik dvigatelestroyeniya [Gazette of engine building], no 3. pp. 93–97. ISSN 1727-0219.
Faeth G. M. (1979), Spray Combustion Models: A Review, AIAA Paper, no 293. pp. 1–18.
James S., Anand M. S., Pope S. B. (2002), “The Lagrangian PDF Transport Method for Simulations of Gas Turbine Combustor Flow”, 38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, Indianapolis, USA, AIAA 2002-4017, 12 p.
