Elastic Hydrodynamic analysis of heavy duty centrifugal compressors designs
DOI:
https://doi.org/10.20998/2078-774X.2016.09.10Анотація
We consider the high centrifugal compressor as the deformable hydro system. The main problem in creating such compressors is very high static and dynamic loads on the structural elements. The cause of stress are: high density of the gas, the small size of the flow channels, high-speed rotary, flexible shaft, the deformation caused by the load causes the Rotary movement relative to the stator elements. This leads to a significant deviation of the actual dimensions from rated.. At the design stage of the compressor it is necessary to consider these factors. The substantiation and the formulation of the problem of complex elastohydrodynamic (EHD) analysis compressor designs by joint decision of the elasticity equations of hydrodynamics. Using the methods of the similarity dimension of the main parameters and criteria for the review. Design nodes, which are subjects to elastic deformations are interrelated elements of the common system. Task UGD – analysis of each node is solved by iterative methods. Using previously obtained solutions for the basic elements received the results of the EHD analysis of compressor design pressure of 80 MPa.
Посилання
Loytzyansky, L. G. (1970), Mehanika zhidkosti i gaza [Mechanics of liquid and gas], Nauka, Moscow, Russia.
Bondarenko, G. A. (1989), ²Uprugogidrodinamicheskij analiz konstrukcij centrobezhnyh kompressorov vysokogo davlenija[Progovernmental structural analysis of centrifugal compressors high pressure]², Himicheskoe i neftjanoe mashinostroenie[Chemical and petroleum engineering], no. 8, pp. 17–19.
Sedov, L. I. (1972), Metody podobija i razmernosti v mehanike [Methods of similarity and dimension in mechanics],Nauka,Moscow, Russia.
Bondarenko, G. A., Ganelin, Y. B. and Berezhnoy, I. S. (1978), ²Uprugogidrodinamicheskij analiz uplotnenijplavajushhimikol'cami [Progovernmental analysis of floating seal rings]², Sb. nauch. trudov VNIIkompressormash[Proc.scientific.proceedingsofVNIIkompressormash], pp.. 40–44.
Bondarenko, G. A. and Yurko, V. I. (1990), ²Raschet labirintnyh uplotnenij s uchetom real'nyh svojstv gazov [Calculationoflabyrinth seals taking into account the real properties of gases]², Himicheskoe i neftjanoe mashinostroenie[Chemicalandpetroleumengineering], no. 4, pp. 21–23.
Hvorost, V. A. and Bondarenko, G. A. (1988), ² Kolebanija valoprovoda kompressora SVD, vyzvannye tehnologicheskimiijekspluatacionnymi nesovershenstvami [Oscillations of the shafting of the compressor SVD,causedbytechnologicalandoperationalimperfections]², Sb. nauch. trudov VNIIkompressormash[Proc.scientific.proceedingsofVNIIkompressormash], pp. 43–52.
Bondarenko, G. A. (1990), ²Primenenie metoda uprugogidrodinamicheskogo analiza konstrukcii pri razrabotke kompressoranadavlenie 80 MPa [The application of the method of analysis of the progovernmental structuresinthedevelopmentofthecompressor at a pressure of 80 MPa]², Voprosy raschetaiissledovanijacentrobezhnyhkompressorovsverhvysokogodavlenija [Problems of design and researchcentrifugalcompressorshighpressure], pp. 17–24.
